@Drangir cannon-fodder-civilian-parts - you can get them in resin over there. I would strongly advise not to do so based on my (and others) experiences. You are better off getting a Stargrave Cre...

@Brian Van De Walker Oh, derp, I was pretty sure it was about civilian parts which are print only.

That is the limit of my photographic skillset :(. It also exposes that those girls are still WIP paintwise, no base no varnish. I don't normally go further - they are fit for the table as is. The...

It's mixing Grongnard Torsos in wiith a group of CF1/2 torso figures where the scale difference shows up. I fully appreciate that '28mm' can go from anything from true 28mm to 35mm++ depending on ...

@JTam I would rather see a Sci Fi Ashigaru sun helmet with a lower half gas mask, or was that what you meant by saucer hat?  

@Drangir if he where just talking print store stuff, I recall there being a mild "random sizing issue" with the prints (I have not ordered any I just saw pics of a guy's two order of the robots bei...

@Dennis Horne  Thanks for posting these.   Any chance of a higher res version of the picture?  It's hard to appreciate your work.

I saw said C-P stuff, but I opted for set of Heresy gear I'll order next month when the friend comes to country. Their small arms seems to fit DF very well. Not a fan of rifles, but WA makes them g...

@Drangir I didn't realise you were out of the UK. I think both the Sprue Shop and Emporium also sell via Etsy which gets around the EU-UK postal issues. Those silenced pistols I was referring to ...

The upgrade pack costs me less than 15 pounds and shipping is dirty cheap. It seems a lot of producers and specialised stores are localised in GB. We have a lot of hobby stores in PL, but hardly an...

They are a cohesive force ;) 5 girl elite XR squad or individual Stargrave pathfinders ? There is another bereted Stargrave head somewhere in the spares collection, I have one CFII torso held back...

@Drangir I've used the Warlord Concord troopers as part of a multbox mash up. I got  box of them along with a box of Stargrave troopers. The Stargrave trooper torsos were mixed with WA Canno...

@Drangir There's also this site : https://thesprueshop.co.uk/

I did some additional research, thanks a lot for you all for help. With 20 soldiers and great weapons in the pack I won't need a lot of special characters. I considered to even get newcoming novit...

Great work. The paint job sells them as members of a cohesive force.

The Sisters of Faith are very, very fiddly to build (separate hands for everything - good if you want to add them to a different arm though!). Also they are very tall, towering over regular 28mm sc...

@Andreas Mayrhofer  That was one heck of a productive vacation.

Thank you for introspective and delightful input, it really helps! I think the best way will be to pick some other WA product for the parts and I'll probably just cut the hands for the best fit. I...

Difficult to recommend bits without physically seeing their use. However these https://store.warlordgames.com/products/concord-strike-squad-support-drones have slender arms & alien apperance. M...

@JTam thanks mate. Now you will have to wait a bit longer between the updates as my vacation is over. 

@Drangir Well, there is actually an acessory sprue from the older "true 32mm" scale minis that you can still find on ebay from time to time like this lot: https://www.ebay.com/itm/394613120381?has...

What? Anyways, another possibility: "Rabble", "Dregs" or "Poorly equipped". We've got plenty of model options for the well armored/equipped icons, but what about the more common infantryman who wa...

Pun in the title intended. I plan to grab a box of Panzerjager, maybe Stormtroopers too, but I have a little issue - all models have two-handed weapons, rifles etc. and from what I saw on the spru...

According to the Tribe page, the parts should feat rather neatly. Some arms seem bit too long etc. but they're made to fit. Maybe it's the print store who put wrong data to the machine?

@JTam Nope, I have no printing capacity. I am refering to plastic Cannon Fodder (1 and 2) vs plastic Grognards (line and command sprues) and the Atlantic Digital printed Civilians that came with t...

@Andreas Mayrhofer  I missed a bunch of updates.  That table looks incredible.   Just awesome.

Update:  

@Dennis Horne  If I understand you correctly you are saying the Cannon Fodder STL printed at a size that did not permit compatibility with Grognards. Have you tried plastic Cannon Fodder wit...

Oh yeah, most weapons will fit if fiddled a bit. I was saying mostly about direct connections between sets without or with minimal cutting. I'm currently buffing my lizers up with some printed lasg...

@Drangir I actually have a WA Lizard Army, a 3 WA box deal of them. I built for OPFOR use against my Colonial Militia. The beast in the middle is a clockwork TRex  I got from this lot : mAr...

Actually it looks like these guys are from 2300 AD.

Oof, sounds like a one fat mistake! Not wonder you're vary of this. I have only lizards and einharjar in my collection, so no worries about incompatibility for me.

@JTam - here are those heads from Statuesque Minis mounted on CF torsos along with 2 Stargrave heads as a bonus. Initial rush paint job, will need washes, base work etc later.   L-R C...

I don't follow social media myself ;). I bought a set of those WA Digital civilians as part of that infamous order which took 6 months to resolve, the kit was a mix of extra arms parts and a few C...

I don't follow the tribe, so I'm not aware of civilians. Also it's understandable that not all parts will be compatible, like Einharjar won't fit easily to others. Anatomy between sets will be slig...

@Drangir Compatibility with Cannon Fodder or Grognard ? There are 2 incompatible scales in the Death Fields range. The Cannon Fodder Civilians came out as Grognard size.

@Alessio De Carolis  40K Sherman style STL: + Vanquisher variant of course: = https://tanks-encyclopedia.com/coldwar/Israel/ISherman.php

@JTam About strange IDF tanks https://youtu.be/-BbQd_MGzCA

I voted for expansion sets, such as a weapons' one for the OhRra, plus trench and conquistadores zombies.

Will be perfect to add some special troopers to my Grognards!

I voted Characters. I figure thats what  the Digitial store really is for in the longer run.

Perhaps, but why since Grogs exists? Edit: Yeah they are FFL for a non-Death Fields setting, so they well likely be in WA's Historical scale (which is a plus as far as I am concerned). Still not s...

Sidenote:  Great heads if you want to do female Commonwealth Paras or armor crewmen for some reason.

@Drangir  "They've shown male counterparts" Yes, supposedly: But I don't remember seeing normal (un-scarred) faces or un-spiked helmets in any renders of the male Infantry.

@Bill Thomas  I recently did business with Great Escape Games: https://wargamesatlantic.com/community/xenforum/topic/84603/romanian-ww2-plastics Completely satisfied with the transaction.

The Great Escape Games cavalry miniatures arrived a week or two ago.  Well packaged they arrived no muss and no fuss. Completely satisfied with the transaction.

I think most of my Damned will have regular heads. Oh, some crazies there and there, but I really dig the female sculpts here. They've shown male counterparts, but I can't find the photos. @Dennis...

@Alessio De Carolis When it comes to minis and widely sci-fi minis there are shapes we expect from a weapon to make sense, but there's a lot of wiggle room for creators to make it more or less grou...

An ode to Panzer Lehr Panzerschrecks: https://wargamesatlantic.com/community/xenforum/topic/45824/panzer-lehr-expansion-set-panzerschreck LOTS of ideas here as well: https://wargamesatlantic.com...

@Hudson Adams  Some ideas: Notes: 1. Zombie or skeleton Halflings are fun. 2. Napoleonic Zombies will be very well received thanks to Silver Bayonet. 3. Now is a great time for trench z...